Current official version: 2026 HTS Revision 23, published 10 November 2026. For an import decision, record the HTS version used — not only the tariff number.
Planning guidance only. It is not a customs ruling, tax opinion, legal advice or binding freight quotation. Verify current rules and shipment-specific rates before acting.
Key takeaways
- USITC published the 2026 Basic Edition plus 23 revisions through 10 November 2026.
- Each release carries its own modification source, so an HTS number should be stored with the revision/date used for the decision.
- Revision 23 is the current 2026 release as of this review and is available in HTML, CSV, XLSX and JSON.
- A new revision does not mean every tariff line changed; affected provisions must be checked against the listed legal instruments.
Current customs facts below are refreshed from LandedScope's verified rules database; product classification and shipment-specific treatment still require verification.
Current verified rule checks
These time-sensitive facts come from LandedScope's read-only Supabase rules database. They supplement the editorial guide; they do not classify your goods or replace a customs ruling.
178 China Section 301 exclusions extended through January 9, 2027
2026 U.S. Section 232 metals regime is product-specific and full-customs-value based
From classification to cleared cost
How this decision connects to the rest of the import workflow.
Why an HTS revision tracker belongs in the import record
The U.S. International Trade Commission publishes each HTS edition and revision with its release date, downloadable data files and the legal instruments that caused the change. The 2026 archive shows 23 revisions after the Basic Edition.
A classification can remain the same while Chapter 99 treatment, an exclusion, a statistical reporting number or another tariff measure changes. That is why a durable classification record should store both the HTSUS number and the tariff revision used on the decision date.
2026 revision timeline
The table below is a release-level tracker. The “official change” column summarizes the modification source listed by USITC; it is not a claim that every HTS line changed in that release.
| HTS version | Release date | Official change / modification source |
|---|---|---|
| 2026 HTS Revision 23 | 2026-11-10 | Section 301 maritime/logistics/shipbuilding modification + China technology-transfer exclusion extension. |
| 2026 HTS Revision 22 | 2026-10-30 | Canada motor-vehicle additional-duty scope modification. |
| 2026 HTS Revision 21 | 2026-10-09 | HTS modification + conforming amendment to a China Section 301 product exclusion. |
| 2026 HTS Revision 20 | 2026-09-28 | Specialty-pharmaceutical tariff-adjustment guidance/procedures + technical corrections. |
| 2026 HTS Revision 19 | 2026-09-15 | Canada alcohol and motor-vehicle additional-duty scope modifications. |
| 2026 HTS Revision 18 | 2026-09-02 | Unmanned aircraft, beef and conforming amendments to China Section 301 exclusions. |
| 2026 HTS Revision 17 | 2026-08-24 | Canada alcohol, dairy and motor-vehicle additional duties plus temporary suspension action. |
| 2026 HTS Revision 16 | 2026-08-14 | Quartz surface-product safeguard adjustment + 484(f) statistical changes. |
| 2026 HTS Revision 15 | 2026-08-03 | Tariff reduction for qualifying UK patented pharmaceuticals and ingredients. |
| 2026 HTS Revision 14 | 2026-07-31 | Section 301 forced-labor actions + Brazil action + pharmaceutical import adjustment. |
| 2026 HTS Revision 13 | 2026-07-29 | Section 301 forced-labor actions. |
| 2026 HTS Revision 12 | 2026-07-21 | Brazil Section 301 action. |
| 2026 HTS Revision 11 | 2026-07-01 | 484(f) statistical annotation changes. |
| 2026 HTS Revision 10 | 2026-06-08 | Further adjustment of aluminum, steel and copper tariff regimes. |
| 2026 HTS Revision 9 | 2026-05-28 | Tariff-related implementation for the U.S.–Taiwan trade/security agreement. |
| 2026 HTS Revision 8 | 2026-05-22 | Appropriations-related HTS changes + vehicle-parts import-adjustment procedures. |
| 2026 HTS Revision 7 | 2026-04-29 | Technical corrections implementing Proclamation 11021 metal duties. |
| 2026 HTS Revision 6 | 2026-04-23 | Procedures for tariff adjustments tied to new U.S. steel/aluminum production commitments. |
| 2026 HTS Revision 5 | 2026-04-08 | Strengthened Section 232 aluminum, steel and copper regime. |
| 2026 HTS Revision 4 | 2026-02-25 | Temporary Section 122 surcharge + continued suspension of duty-free de minimis treatment. |
| 2026 HTS Revision 3 | 2026-02-11 | Beef action + modified duties addressing Russia-related threats. |
| 2026 HTS Revision 2 | 2026-01-30 | 484(f) statistical annotation changes. |
| 2026 HTS Revision 1 | 2026-01-16 | Semiconductors, semiconductor manufacturing equipment and derivative products. |
| 2026 HTS Basic Edition | 2025-12-31 | 2026 baseline schedule including trade-agreement, Section 301, Nicaragua and staged-FTA modifications. |
Source: USITC HTS Archive. Use the current release file and its cited Federal Register instruments to determine whether a specific HTSUS provision changed.
The current release is Revision 23
USITC published Revision 23 on 10 November 2026 and provides HTML, CSV, XLSX and JSON downloads. Its listed modification sources include the Section 301 maritime/logistics/shipbuilding action and the extension of China technology-transfer product exclusions.
That machine-readable availability makes the HTS archive unusually valuable for a rules engine: LandedScope can preserve release identity, source instruments and future diffs without scraping a search-results page or inventing a tariff database.
What to save with a classification decision
Complete HTSUS classification used for the entry decision.
HTS edition/revision and release date.
Product facts and any ruling or precedent used to support classification.
Applicable Chapter 99 provision, exclusion or other special measure.
Date the decision was last verified against the current USITC release.
A revision does not mean every product changed
Do not treat every HTS release as a global tariff change. A revision may implement one targeted action, a statistical annotation, a technical correction or a product-specific measure.
The safe workflow is revision-level monitoring first, followed by affected-provision analysis for the products and rule sets that LandedScope actually tracks.
Open a clean worksheet after checking the current HTS revision
No HTS code or rate is prefilled. Record the current tariff revision with the classification, then enter only shipment-specific customs values and verified rates.
No values are prefilled — enter your own shipment facts and verified rates.What goes wrong — and how to correct it
| Risk | Common mistake | Why it matters | Correct action |
|---|---|---|---|
| HighIncomplete classification | Using a generic product name or six-digit HS heading as the final national tariff line. | The ordinary duty rate, trade measures or product controls can be wrong. | Confirm the destination-specific classification and retain the supporting product facts. |
| HighWrong taxable base | Applying duty or import tax to the supplier invoice without checking valuation adjustments. | Duty and tax can both be misstated because they may use different bases. | Build customs value first, then apply duty and the destination-specific tax base in the correct order. |
| HighAdditional measures omitted | Checking only the base tariff rate and ignoring origin-specific additional measures. | The import budget can be materially incomplete at clearance. | Review the full tariff treatment, origin and any additional measures close to the entry date. |
Topic-specific checks
- Saving an HTS code without the tariff revision or verification date.
- Treating every new HTS release as if every duty rate changed.
- Using an older exclusion or Chapter 99 reference after a conforming HTS revision changed the statistical reporting number.
Pre-decision checklist
Use this immediately before you approve a quote, purchase order or shipment plan. High-risk items should not remain unresolved.
- HighThe complete national tariff classification is confirmed, not only a six-digit HS heading.
- HighCountry of origin and any applicable preference or additional trade measure are checked.
- HighCustoms value follows the destination valuation rules and the shipment terms.
- HighOrdinary duty and any additional duty layer are recorded separately.
- HighImport VAT/GST uses the correct taxable base for the destination.
- HighImporter-of-record responsibility and required registrations are confirmed.
- MediumSupporting invoice, origin and valuation records are retained.
- MediumRates and legal guidance are rechecked close to the entry date.
Questions importers ask
What is the current 2026 HTS revision?
USITC lists 2026 HTS Revision 23, published 10 November 2026, as the current 2026 release as of this review.
Does a new HTS revision change every duty rate?
No. Each release has its own modification sources and can affect only selected provisions, statistical categories or special measures.
Why store the revision date with an HTS code?
Because the same tariff number can exist across revisions while related Chapter 99 measures, exclusions, reporting numbers or legal notes change.
Can LandedScope automatically assign an HTS code from the tracker?
No. The tracker records tariff versions and source changes; classification still requires product-specific legal analysis.
What changed, and when we checked it
Verified the full 2026 Basic Edition plus Revision 1–23 release sequence and the current Revision 23 status.
USITC — HTS Archive ↗Verified Revision 23 release date, machine-readable downloads and listed Section 301 modification sources.
USITC — 2026 HTS Revision 23 ↗Cite this HTS revision tracker
LandedScope. “U.S. HTS Revision Tracker 2026: Every USITC Release.” Reviewed 21 November 2026. Primary source: U.S. International Trade Commission Harmonized Tariff Schedule Archive.
Primary source: USITC — HTS Archive ↗Official references
- USITC — Harmonized Tariff Information ↗
- USITC — HTS Archive ↗
- USITC — 2026 HTS Revision 23 ↗
- USITC — HTS Announcement Archive ↗
A reviewed link is not a shipment-specific customs ruling. Classification, origin, valuation and treatment still require verification for the actual goods.
Tariffs, tax treatment, valuation and freight rules can change by product, origin, destination and transaction. Verify the current official sources before acting.
Open official source registerStart from the worked assumptions, then replace them with your goods cost, actual freight quote and verified customs inputs. Missing critical inputs remain visible.