A landed-cost model that works for a U.S. import should not be copied unchanged into a UK or EU shipment. The three systems share the same broad idea, but the valuation adjustments and the import-tax layer are materially different.
Planning guidance only. It is not a customs ruling, tax opinion, legal advice or binding freight quotation. Verify current rules and shipment-specific rates before acting.
Key takeaways
- Do not reuse one market’s import formula in another: the U.S., UK and EU use different tariff, low-value and import-tax structures.
- The UK’s current £135 low-value customs-duty relief remains current law as reviewed on 18 November 2026; the announced removal is a future reform with an operative date still to be fixed.
- The EU separately tracks the temporary €3 low-value customs duty, the €2 Union handling fee and import VAT treatment; those components should not be collapsed into one percentage.
- The United States has no federal import VAT, but ordinary duty, Chapter 99 trade remedies, MPF/HMF and other entry charges can still affect the customs cash requirement.
Current customs facts below are refreshed from LandedScope's verified rules database; product classification and shipment-specific treatment still require verification.
Current verified rule checks
These time-sensitive facts come from LandedScope's read-only Supabase rules database. They supplement the editorial guide; they do not classify your goods or replace a customs ruling.
Duty-free de minimis treatment suspended for covered shipments
Current UK low-value import duty relief up to £135
UK plans to remove £135 low-value customs duty relief
Temporary €3 customs duty for low-value distance-sale consignments
EU-wide €2 Union handling fee
Product Identifiers mandatory for covered e-commerce imports
From classification to cleared cost
The comparison at a glance
The biggest practical differences are that international freight and insurance are generally treated differently in U.S. valuation than in UK and EU valuation, the United States has no federal import VAT, the UK and EU can charge import VAT on a broader taxable amount than the duty base, and potential VAT recovery is a separate eligibility question rather than a reason to delete VAT from the cash-flow model.
| Market | Customs-value starting point | International freight & insurance | Import VAT layer |
|---|---|---|---|
| United States | Transaction value is normally the primary method, with required statutory additions | International transport and insurance incident to the shipment are generally excluded when properly identified | No federal import VAT |
| Great Britain | Transaction value is normally the first valuation method, with required additions and deductions | Transport and insurance to the place of importation can be included in customs value | Import VAT applies on a broader VAT value |
| European Union | Transaction value is the primary method for most trade, adjusted under the Union Customs Code | Transport and related costs to the point of entry into the EU can be included in customs value | Import VAT applies on a broader taxable amount |
“FOB” and “CIF” are useful commercial shorthand, but they are not substitutes for the legal customs-valuation rules. The Incoterm tells you who pays for costs; it does not by itself determine the customs value.
This guide focuses on standard commercial imports into the United States, Great Britain and the EU. Northern Ireland and special customs or VAT procedures can require different treatment.
United States: transaction value without a federal import VAT
For U.S. imports, transaction value is generally the preferred method of appraisement. CBP describes the starting point as the price actually paid or payable for the merchandise when sold for exportation to the United States, plus required statutory additions. International freight, insurance and related international-shipment charges are generally excluded from the price paid or payable when the conditions for exclusion are met. That is why a U.S. worksheet often looks like this:
customs value × ordinary HTS duty rate = ordinary duty customs value × applicable additional tariff rate(s) = additional duty
There is no U.S. federal import VAT comparable to the UK or EU system.
For covered merchandise, the former $800 de minimis duty-free treatment is suspended; shipment value below $800 is no longer a reason to default duty to zero.
That does not mean the import has only one border cost: Chapter 99 measures, MPF and HMF where applicable, brokerage, other trade remedies, inland delivery and FBA inbound costs may still apply.
State sales tax on later resale is a different tax question and should not be confused with import duty.
United Kingdom: customs value first, then a broader VAT value
Great Britain also uses transaction value as the normal first valuation method, but transport and insurance treatment differs from the United States. HMRC guidance requires relevant delivery costs to the place of introduction into the UK to be included in customs value, and insurance connected with transportation up to importation can also form part of it. A simplified planning sequence is:
transaction value + required valuation additions + qualifying transport / insurance to the UK border = customs value customs value × duty rate = customs duty customs value + customs duty + qualifying incidental costs for VAT = import VAT value import VAT value × applicable VAT rate = import VAT
Postponed VAT Accounting changes cash timing
A UK VAT-registered business that meets the conditions can use Postponed VAT Accounting (PVA) to declare and recover import VAT on the same VAT Return, subject to the normal input-tax rules. That can change cash flow materially. It does not mean import VAT is automatically free or irrelevant: the importer must still have the right to recover it, use the correct importer and VAT details, and satisfy the normal VAT rules. For landed-cost planning, the cleaner approach is to show gross import cash and tax exposure separately from potential recoverable VAT.
The UK standard VAT rate is 20%, but the correct rate and treatment still depend on the goods and the circumstances. As of 7 November 2026, qualifying low-value imports at £135 or less can still use the current customs-duty relief; the government has decided to remove that relief under a future LVI regime, but the operative date is not yet fixed and must not be applied as current law.
European Union: customs value plus member-state import VAT
EU customs valuation is also based primarily on transaction value, with adjustments required by the Union Customs Code. The European Commission identifies transport and related costs up to the point of entry into the customs territory of the Union as elements that can be included in customs value. The import VAT taxable amount then begins with the customs value and can include customs duty, taxes and other charges, plus incidental expenses not already included in it. A simplified model is:
transaction value + required valuation additions + qualifying transport / insurance to the EU entry point = customs value customs value × applicable EU duty rate = customs duty customs value + duty + applicable taxes / charges / incidentals = import VAT taxable amount VAT taxable amount × member-state VAT rate = import VAT
The VAT rate is determined by the relevant member state and the product treatment. Do not use one “EU VAT rate” for every destination. For qualifying distance-sale consignments up to €150, the separate temporary €3 customs duty has applied since 1 July 2026; a €2 Union handling fee and mandatory Product Identifiers apply from 1 November 2026. See the dedicated EU fact page for scope and exceptions.
Why freight can change duty and VAT differently
This is one of the most important differences between the systems.
U.S. import
If the customs value is validly established under transaction value and the international freight is separately identifiable, a higher freight quote will usually increase the logistics cost without increasing the customs value by the same amount.
UK and EU import
Qualifying international freight to the border or point of entry can form part of customs value. A more expensive freight method can therefore increase the freight line itself, the customs-duty base, and the import-VAT base. The same freight upgrade can have a larger landed-cost effect in a VAT jurisdiction than a simple “air quote minus ocean quote” comparison suggests.
Recoverable VAT is not the same as a discount
For eligible VAT-registered businesses, import VAT may be recoverable or deductible under the normal rules. But three different numbers should not be mixed together:
1. Cash at import — what the importer must fund or account for when the goods enter.
2. Recoverable VAT — the amount that may be reclaimed or deducted if the legal conditions are met.
3. Permanent economic cost — the cost that remains after any valid recovery.
A business that treats recoverable VAT as a permanent cost can overstate product economics. A business that removes VAT without checking eligibility can understate working-capital needs or tax exposure. The correct model keeps both visible.
A safer cross-market landed-cost workflow
Use the destination’s complete tariff classification. A U.S. HTSUS code should not be copied into a UK or EU declaration. Each system uses its own national or regional tariff subdivisions and measures.
Establish customs value under the destination rules. Do not use “supplier invoice” or “FOB” as an automatic customs-value shortcut.
Apply duty to the correct base. Check whether the duty is ad valorem, specific, compound, quota-based, or affected by a preference or special measure.
Build the import-VAT base separately. For UK and EU imports, add only the amounts that legally belong in the import-VAT value, and avoid double counting freight that is already inside customs value.
Model possible VAT recovery separately. Do not net recoverable VAT out of the gross import cost until the importer’s eligibility and documentation have been confirmed.
What this means for Amazon FBA sellers
If you ship the same SKU from China to Amazon fulfilment networks in the U.S., UK and Germany, you should not expect the same landed-cost formula. The product can have a different tariff classification, customs-value calculation, ordinary duty rate, trade measures, import-VAT layer, and tax-recovery and cash-flow treatment.
That is why LandedScope asks you to select a destination market and enter rates you have verified rather than pretending one global tariff engine can determine the legal answer from a product name. Use the China to UK duty and VAT calculator or the China to Germany import cost calculator for those destinations, and the generic duty and tax calculator where you only need the two-layer arithmetic. The generic VAT versus duty explanation covers the concept without the cross-market comparison.
Rebuild the two-layer arithmetic
Nothing is prefilled. Use the same customs value in each market you compare, and enter only rates you have verified.
No values are prefilled — enter your own shipment facts and verified rates.What goes wrong — and how to correct it
| Risk | Common mistake | Why it matters | Correct action |
|---|---|---|---|
| HighIncomplete classification | Using a generic product name or six-digit HS heading as the final national tariff line. | The ordinary duty rate, trade measures or product controls can be wrong. | Confirm the destination-specific classification and retain the supporting product facts. |
| HighWrong taxable base | Applying duty or import tax to the supplier invoice without checking valuation adjustments. | Duty and tax can both be misstated because they may use different bases. | Build customs value first, then apply duty and the destination-specific tax base in the correct order. |
| HighAdditional measures omitted | Checking only the base tariff rate and ignoring origin-specific additional measures. | The import budget can be materially incomplete at clearance. | Review the full tariff treatment, origin and any additional measures close to the entry date. |
Topic-specific checks
- Applying a UK or EU VAT-style taxable-base formula to a U.S. import.
- Treating the UK’s planned low-value relief removal as if it were already in force.
- Combining the EU €3 customs duty and €2 handling fee into one charge or assuming IOSS eliminates customs duty.
- Comparing three markets using the same customs value without checking each jurisdiction’s valuation and tax-base rules.
Pre-decision checklist
Use this immediately before you approve a quote, purchase order or shipment plan. High-risk items should not remain unresolved.
- HighThe complete national tariff classification is confirmed, not only a six-digit HS heading.
- HighCountry of origin and any applicable preference or additional trade measure are checked.
- HighCustoms value follows the destination valuation rules and the shipment terms.
- HighOrdinary duty and any additional duty layer are recorded separately.
- HighImport VAT/GST uses the correct taxable base for the destination.
- HighImporter-of-record responsibility and required registrations are confirmed.
- MediumSupporting invoice, origin and valuation records are retained.
- MediumRates and legal guidance are rechecked close to the entry date.
Questions importers ask
Is UK or EU customs value simply CIF?
Not exactly. A “CIF-type value” can be a useful planning shorthand because freight and insurance to the border can be included, but the legal customs value is determined under the applicable valuation rules, not by the Incoterm label alone.
Is import VAT always a permanent landed cost?
No. Eligible VAT-registered businesses may be able to recover or deduct import VAT, subject to local rules and documentation. It should be modeled separately from permanent cost rather than automatically included forever or automatically removed.
Does the United States have import VAT?
No federal import VAT. U.S. imports can still face ordinary customs duty, Chapter 99 measures, processing fees, other trade remedies and later state or local tax obligations.
What changed, and when we checked it
Rechecked the UK low-value customs reform page: the current £135 relief remains in force while removal is planned for a future operative date.
UK Government — low-value import customs reform ↗Rechecked HM Treasury Budget 2026 implementation context; it changes the timetable for reform but does not make the future rule current law.
HM Treasury — Budget 2026 OOTLAR ↗Rechecked EU Commission sources for the temporary €3 low-value customs duty, €2 Union handling fee and VAT taxable-amount context.
European Commission — EU Customs Reform ↗Rechecked the USITC HTS source; U.S. duty remains product- and Chapter-99-specific and no federal import VAT is inserted into the calculator.
USITC — Harmonized Tariff Schedule ↗Cite this U.S. vs UK vs EU import-cost comparison
LandedScope. “UK & EU Import VAT vs U.S. Duty: 2026 Comparison.” Reviewed 18 November 2026. Cross-market planning guide using current UK, EU and U.S. official tariff and tax references; shipment-specific treatment remains jurisdiction- and product-dependent.
Primary source: European Commission — EU Customs Reform ↗Official references
- UK Government — Trade Tariff ↗
- UK Government — low-value import customs reform (current £135 relief + planned removal) ↗
- HM Treasury — Budget 2026 OOTLAR (accelerated timetable; not current law) ↗
- EU Commission — temporary €3 low-value customs duty ↗
- EU Commission — Customs Reform / €2 Union handling fee ↗
- EU Commission — VAT taxable amount ↗
- EU Access2Markets ↗
- USITC — Harmonized Tariff Schedule ↗
A reviewed link is not a shipment-specific customs ruling. Classification, origin, valuation and treatment still require verification for the actual goods.
Tariffs, tax treatment, valuation and freight rules can change by product, origin, destination and transaction. Verify the current official sources before acting.
Open official source registerStart from the worked assumptions, then replace them with your goods cost, actual freight quote and verified customs inputs. Missing critical inputs remain visible.