UNIT ECONOMICS

How to Calculate Landed Cost Per Unit

Per-unit landed cost converts a shipment-level budget into a number you can compare with selling price, margin and inventory decisions.

Reviewed 2026-11-18Next review 2027-01-17
QUICK ANSWER

Per-unit landed cost converts a shipment-level budget into a number you can compare with selling price, margin and inventory decisions.

Planning guidance only. It is not a customs ruling, tax opinion, legal advice or binding freight quotation. Verify current rules and shipment-specific rates before acting.

Key takeaways

  • Build the shipment total first; dividing individual charges early hides rounding and allocation errors.
  • Choose an allocation driver deliberately — equal units, customs value, weight or volume all tell different stories.
  • The denominator must be sellable units, not purchased units.
  • Store the freight date, exchange-rate date and duty assumption alongside the result, or the number expires silently.
DECISION PATH

From supplier terms to cost per sellable unit

01Supplier termsprice · quantity · Incoterm
02Shipment factscartons · weight · dimensions
03Freight scopeorigin · main leg · destination
04Import layervalue · duty · tax · clearance
05Inbounddelivery · prep · receiving
06Decisioncost per sellable unit

Start with the complete shipment total

Build the shipment total first. Include supplier cost, transport, customs and required inbound handling. Do not divide individual costs too early if a charge applies to the shipment as a whole.

Choose an allocation method

If every unit is identical, equal allocation is usually sufficient. Mixed-SKU shipments may need allocation by customs value, weight, volume or another defensible driver. A single average can distort the true cost of a bulky or high-duty SKU.

  • Equal units: simplest for one-SKU shipments.

  • By value: useful when duty and insurance broadly follow product value.

  • By weight or volume: useful for freight-heavy mixed shipments.

  • Hybrid allocation: sometimes necessary when different costs follow different drivers.

Use sellable units

A denominator of 1,000 purchased pieces only works if 1,000 pieces are expected to be sellable. Samples, defects and losses can make the effective unit cost higher.

Keep the assumptions visible

Store the shipment quantity, freight quote date, exchange rate date and duty assumptions with the calculation. A per-unit number without its assumptions becomes unreliable as soon as the supplier price or freight market changes.

ILLUSTRATIVE CATEGORY CASE · MIXED-SKU LCL

Why mixed SKUs should not share freight by unit count

Assume one LCL shipment contains 800 hoodies, 1,500 hats and 2,000 tote bags. The three SKUs occupy 1.92 m³, 0.55 m³ and 0.75 m³ respectively. A hypothetical linehaul of $75/m³ is used only to show the allocation logic.

Total volume
1.92 + 0.55 + 0.75 = 3.22 m³
Illustrative LCL linehaul
3.22 × $75 = $241.50
Hoodie share by volume
1.92 ÷ 3.22 = 59.63% → $144.00
Hats share by volume
0.55 ÷ 3.22 = 17.08% → $41.25
Tote-bag share by volume
0.75 ÷ 3.22 = 23.29% → $56.25
If freight were allocated by piece count
Hoodies receive only about $44.93 — $99.07 too little, or about $0.124 per hoodie

Decision takeaway: Use the cost driver that actually creates the charge. For volume-driven LCL, volume is a more defensible freight allocation basis than raw unit count.

This isolates one hypothetical linehaul line and excludes minimums, origin/destination handling and other LCL charges. Allocate each real charge using the driver that best explains it.

Illustrative allocation (not a market rate)

Goods — 1,000 units at $4.20
$4,200.00
International freight (quoted)
$980.00
Customs duty — user-verified rate
$315.00
Clearance and delivery
$240.00
Inbound prep and labels
$180.00
Total import cash cost
$5,915.00
Sellable units (40 damaged)
960
Cost per sellable unit
$6.16

Dividing by the purchased 1,000 units would understate the unit cost by about 4%. Every figure above is an input, not a looked-up rate.

Choosing an allocation driver

Typically included
  • Equal units — every unit is genuinely identical
  • Customs value — duty differs sharply by SKU
  • Weight or volume — bulky light goods dominate freight
Typically excluded
  • A single average across mixed SKUs with very different duty rates
  • Allocating by purchase price when freight is charged on volume
CALCULATOR PRESET

Turn the shipment total into a unit cost

Uses the guide’s 1,000 units at $4.20, the $980 quoted freight, $240 clearance and delivery and $180 prep. Duty stays blank: the guide’s $315 is an illustrative amount, not a verified rate.

Preset inputs are examples. Legal rates and shipment-specific facts still require verification.
Open Amazon FBA Landed Cost Calculator with preset
FAILURE MODES

What goes wrong — and how to correct it

RiskCommon mistakeWhy it mattersCorrect action
HighDouble counted chargesAdding pickup, brokerage or final delivery again when an all-in quote already contains them.The shipment total is overstated and supplier or forwarder comparisons become unreliable.Record the quote scope line by line and assign each charge to one cost bucket only.
HighMissing customs inputsTreating an unknown duty, customs value or import tax as zero.The worksheet can show an artificially low per-unit cost while a critical input is still unresolved.Keep the result incomplete until the classification, customs value and applicable rates are confirmed.
MediumWrong unit denominatorDividing by ordered units when samples, defects or reserved stock are not sellable.The unit cost is understated and the margin model inherits the same error.Use the quantity reasonably expected to be sellable and keep the loss assumption visible.

Topic-specific checks

  • Dividing by purchased quantity after samples or damages are removed from the shipment.
  • Reusing last quarter's per-unit number after the freight quote or exchange rate moved.
  • Allocating a shipment-level minimum charge equally across a single large SKU.
COPY · PRINT · SAVE

Pre-decision checklist

Use this immediately before you approve a quote, purchase order or shipment plan. High-risk items should not remain unresolved.

  • HighSupplier price, quantity and Incoterm are confirmed on the same commercial basis.
  • HighThe freight quote has a clear scope, destination and validity date.
  • HighCustoms value is confirmed for the destination rather than copied from a generic worksheet.
  • HighDuty, additional tariff measures and import tax are verified separately.
  • MediumRecoverable VAT/GST is shown separately from permanent economic cost.
  • HighBrokerage, destination delivery, prep and receiving are counted once only.
  • MediumThe denominator is sellable units, not simply ordered units.
  • MediumThe exchange-rate date and source are retained with the scenario.

Questions importers ask

Can I divide freight equally across mixed products?

You can, but it may be misleading if the products differ greatly in weight or volume.

What if I do not know the final duty yet?

Keep the total incomplete or run a clearly labeled scenario; do not treat a missing duty rate as zero.

Use this as planning guidance, not a customs ruling.

Tariffs, tax treatment, valuation and freight rules can change by product, origin, destination and transaction. Verify the current official sources before acting.

Open official source register
Turn this guide into your own shipment decision.

Start from the worked assumptions, then replace them with your goods cost, actual freight quote and verified customs inputs. Missing critical inputs remain visible.

Turn the shipment total into a unit cost